ASCENT™ Ultralight Wood
ASCENT™ Ultralight models deliver an easy, high launch angle without the typical compromises of an ultra-lightweight shaft. Featuring Focused Mass Technology (FMT™), a precise weighting section that utilizes heavier, tungsten-infused prepreg in the butt end to help players turn through the ball better for stronger, straighter/drawn ball flight. ASCENT™ Ultralight models also feature FlyDrive™ Technology – a new application inspired by a similar innovation in high-performance fly fishing rods. A unique, full-length Visco-Elastic Isolation Layer (VEIL) is added to improve overall strength and feel while bolstering the shaft’s resistance to “ovaling,” a common deficiency in thinner-walled designs. FlyDrive™ adds very little weight or thickness so ASCENT™ Ultralight shafts remain quick and fast with a satisfying, solid feel at impact.
For additional information on the ASCENT™ family of shafts, Focused Mass Technology, and FlyDrive, click here.
-
Specifications
Shaft Name Flex Length (in) Weight (g) Tip O.D. (in) Tip Length (in) Butt O.D. (in) Torque (degrees) Kick Pt. ASCENT™ Ultralight 35 R3 46.0 41 0.335 3.0 0.598 8.5 LOW ASCENT™ Ultralight 40 R2 46.0 44 0.335 3.0 0.602 8.3 LOW ASCENT™ Ultralight 40 R 46.0 47 0.335 3.0 0.603 8.2 LOW ASCENT™ Ultralight 40 S 46.0 48 0.335 3.0 0.604 8.0 LOW -
Technology
FlyDrive™ Technology
FlyDrive™ Technology, a new application which utilizes a Visco-Elastic Isolation Layer (VEIL) to improve the stability, feel and peripheral strength of thin-walled shafts with little added weight or thickness.FOCUSED MASS TECHNOLOGY
A precise weighting feature for ultralightweight shafts that helps promote a better turn through the ball at impact for stronger, straighter/drawn ball flight, using the same tungsten-infused prepreg as in Impact Stabilization Zone. -
Fitting
Driver Speed (mph)/Driver Carry (yds) <80/<210 81-90/210-230 91-105/241-259 >106/>260 ASCENT™ Ultralight 35 R3 ASCENT™ Ultralight 40 R2 R S -
Tip Trimming Information
Driver 3 Wood 5 Wood 7 Wood 9 Wood 0" 0.5" 0.75" 1.0" 1.0"